Simulating environmental conditions can be a challenge. We are here to meet that challenge.

Simulating thermal, humidity, and other environmental conditions is essential to ensuring that products are fit for purpose and will not be adversely affected by ranges in temperature, moisture, or other conditions routinely encountered during both normal and adverse use conditions.

DTL performs many of the industry-standard temperature and humidity tests, thermal shock, moisture and dewing, and can simulate almost any thermal condition from -70°C to +200°C, low pressure / high altitude, or accelerated conditions…

Thermal Shock

Temperature / Humidity

Additional Services

  • 2-Zone Thermal Shock (Hot / Cold)
  • 3-Zone Thermal Shock (Hot / Cold / Room Ambient)
  • Basket Transfer Type Thermal Shock Systems (Separate Chambers)
  • Baffle-type Thermal Shock System (Non-Moving Baskets (Including two (2) 39” x 39” x 39” volume and one (1) 8.4” x 8.4”x 8.4” volume)
  • Both Large and Small Environmental Chambers
  • Humidity Capabilities from 5%RH to 100%RH
  • Fast-Ramp Capabilities
  • In-House Full-Service Chamber Repair Team
  • Solar Radiation
  • Altitude / Low Pressure / Decompression
  • HAST
  • Salt Fog / Corrosion
  • Chemical Resistance
  • Fluids Testing
  • Dew Condensation